Drag While applying pressure, swipe your finger up and down or left and right across the screen. This is not a malfunction. Operating modes: 1 Open the pre-recordingscreen. Cannot play back Cannot access the built-inmemory - There is a problem with the built-inmemory. You can then select multiple scenes with the same rating, for example, in order to play back or copy only your favorite scenes. Press g while recording N to fade out and pause the recording. You can link the surround sound to the zoom position or use the microphone as a highly directional shotgun microphone monaural.
Delete some recordings 090, 122 to free some space. However, the actual number of photos that can be recorded will vary depending on the subject and shooting conditions. Operating modes: 100 1 Set the mode switch to. Operating modes: Changing the Assigned Function 1 Open the selection screen for the desired assignable button. Failing to do so may result in permanent data loss.
It is not required to install a driver. Display - 1,024 × 768 dots and more Setup Please refer to the instructions below on how to download and install the software. Contact a Canon Service Center. Cannot write data with this connection. Follow the on-screen instructions to complete the installation.
The advanced image dark areas in the picture appear brighter stabilization 053 will let you shoot in a 058. If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer. You will need to have installed the software supplied with your Eye-Fi card and completed all the required configuration setup in advance. Faders Faders The camcorder offers two professional looking transition effects to fade-inor fade-outscenes. Make sure that the image you want to use has a blue or green area, which will be replaced by the live video using Chroma Key mixing.
This has no effect on the recorded image and does not constitute a malfunction. The main subject is indicated by a white face detection frame and the camcorder will optimize the settings for that person. To select individual scenes 1 Touch on the individual scenes you want to delete. Also, make sure its battery is not exhausted. Freehand drawings can help emphasize a portion of the picture to attract viewers' attention. To write data to the camcorder, connect the compact power adapter then reconnect the camcorder and computer.
Next, select whether the zoom lever operates at a variable or constant speed. Onscreen Displays and Data Code Onscreen Displays and Data Code You can turn most onscreen displays on or off. In such cases, we recommend using an external microphone with a wind screen. When attaching the lens hood, grip belt and straps, be careful not to drop the camcorder. In most cases this is still faster than converting the scenes in the computer so we recommend you convert scenes in the camcorder. Recording and playback times given in the following tables are approximate and vary according to recording mode and charging, recording or playback conditions.
You can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes. Refer to the instruction manual of the Eye-Ficard. You can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes. Sound is distorted or is recorded at lower levels. Operating modes: 1 Open the fader selection screen.
When recording in the built-inmemory, you can choose to use only memory card X for relay recording f94 , or use both memory cards f9497. If this message appears often without apparent reason, contact a Canon Service Center. This allows the camcorder to recording excel in low-lightsituations and produce a When you use relay recording 033 , you wide dynamic range. Viewfinder 2 Turn on the camcorder. Troubleshooting Memory Card and Accessories Cannot insert the memory card. Operating modes: Creating a New Story 1 Start Story Creator mode.
To use backlight correction When recording in situations in which the subject is constantly backlit, you can use backlight correction make the entire picture brighter, especially dark areas. Continued use may damage the camcorder. The default memory for recording both is the built-in memory. To set the zoom lever's zoom speed For the zoom lever, first set the overall zoom speed to one of three levels. Installation Install the software before you connect the camcorder to the computer for the first time. Some scenes were recorded using another device and cannot be copied.