Interval schedules range from 1-day watering every day to 7-day watering every sev- 8 enth day. I - Watering Station identification numbers. The day of the week onwhich the Interval will start will be shown. You will to use as a guide during programming. Route a wire pair from the pump relay into the con- 1.
If necessary, reposition the switch to select the desired program. The controller is the brain of the system, telling the control valves when and how long to supply water to the sprinklers. Note: If you are installing the bracket on drywall or masonry, install screw anchors C to prevent screws from loosening. Off no run time to 4 hours, in one-minute increments. This illustration shows how a program would be displayed if its watering day schedule is turned off.
If necessary,reposition the switch to select the desired program. For outdoor installation of an indoor model, a weather-resistant outdoor cabinet is available. First, it The GreenKeeper 212 is Figure 3 will restore watering operation in case your watering pro- set to display time in the gram is lost due to a power interruption lasting longer 12-hour clock mode. Selecting Off simply places the program on hold until one of the watering day schedules is selected. Wrap the cable around the post as shown below. Upon completion of the manualwatering operation, the controller will return to the Automatic mode.
For example, the soiltype i. The program currently operating is indicated by the flashing letter. Station 1 sprinklers run for 10 minutes and shut off. The display will begin flashing 12:00. Once the GreenKeeper is installed, the only thing left to do is program it to the watering pattern that best benefits your lawn. Note: Additional programs set to start will operate one at a time in alphabetical order regardless of the order they were selected. To turn another program Off, repeat steps and as needed.
Note: The display will begin to change rapidly if eitherbutton is held down for more than two seconds. Note: Connecting a master valve or pump start relay is optional and may not be required in your sprinkler system. Each of these items will be explained in further detail within the appropriate programming, operating and installation sections of this guide. Each of these items will button — Increases the time display, scrolls for- be explained in further detail within the appropriate pro- ward through the program information and selects gramming, operating and installation sections of this watering days. Automatic operation will occur whenever a programmed watering day and 26 start time match the current time and day. Program start time number 1 will begin flashing. Selecting Off simplyplaces the program on hold until one of the watering dayschedules is selected.
This is a seven-day schedule which starts onSunday and ends on Saturday. The controller is the brain of the system, telling the controlvalves when and how long to supply water to the sprinklers. Route the valve control wires between the valves and the controller. This cableis insulated for direct burial and is color-coded to simplify installation. Note: Turning off a program does not alter or erase apreset watering day schedule. Calendar Schedule A Calendar schedule enables you to select specific days of the week to water, for example, Monday, Wednesday and Friday.
Valve 2 R Each valve controls a specific group of sprinklers called a watering station. Switch positions provided for Alkaline and rechargeable batteries. Attach a separate cable wire to the remaining wire from each valve solenoid. Either Alkaline or rechargeable battery types can be installed. If the problem cannot be resolved or you would like assistance with any Toro irrigation product, call our toll-free Toro Help Line, 1-800-664-4740 Monday through Friday, 7:30 —. If necessary,reposition the switch to select the desired program.
The first station number assigned to the program will start flashing. All watering control features apply to watering programs started manually and automatically. Each program letter will be displayed as it is selected. The GreenKeeper 212 controller has three modes of This illustration shows the operation: Automatic, Manual and Off. The Manual mode enables the watering programs to be started and controlled manually at any time. Attach the white color-codedwire from the cable to one wire from each valve solenoid. This is a seven-dayschedule which starts on Sunday and ends on Saturday.